Solarez Soft Surfboard Repair Kit

Softboard Repair Kit Styrofoam & EPS-Core constructed soft surfboards, bodyboards and SUPs have become quite popular these days but provide a real challenge to repair. SPONGE-REZ is awesome for the repair on the outer skin and hull, but can melt the inner core. If EPS (Styrofoam) is visible, use the Solarez UV cure epoxy to make a protective coating over the EPS, cure it in the sun for 45 seconds, now apply SPONGE-REZ on top. Deep internal repairs should be repaired with a 2-part epoxy such as wahoo 2-part epoxy https://solarez.com/wahoo-2-part-epoxy-kit-2part-2partepoxy.html General Exterior Repair Directions:

1. Surface should be clean, dry and free of dirt, grease or wax.
2. If EPS (Styrofoam) is present, apply a thin coat of the Solarez Epoxy as a protective barrier, cure it in the sun for 45 seconds
3. Apply Sponge Rez as a protective coating and just allow it to dry overnight
4. If you are adhering two pieces together, apply Sponge Rez to both surfaces, spread thin like butter, allow to dry for 5 minutes then join surfaces and use masking tape to hold in place overnight.

Filling a deep ding that invades to the EPS Core:

1. If white EPS foam is exposed in any situation, first coat the EPS with Solarez EPOXY (in the blue tube). Allow 2 to 3 minutes for it to cure in good sunlight or with artificial UV light. Now you can apply SPONGE- -REZ to this surface and it will make a smooth, self-leveling overcoat.
2. Apply Solarez EPOXY (in the blue tube) to the white EPS foam, spread it smooth and allow 2 to 3 minutes exposure to sunlight.
3. Apply a smooth coating of SPONGE-REZ to the cured Solarez EPOXY and apply a smooth coat to the delaminated hull or deck material.
4. Allow both sides to dry about 5-10 minutes, then press them together. It is best if you seal the repair shut with masking tape and allow it to sit overnight.

Wetsuit Sealing:

1. Apply two lines of masking tape 1/8" away from the seam center so you now have 1/4" gutter with the seam in the middle.
2. In the shade, apply a liberal bead of Sponge-Rez, enough so that it floods the gap. Allow it to soak in for 30 seconds
3. Remove the tape while the resin is still wet.
4. Allow to cure at least 2 hours before using

• SUP
• Bodyboards
• Soft Surfboards
• Tough
• Clear
• Flexible
• Waterproof

Epoxy Ding Repair
Download Safety Data Sheet
Download Technical Data Sheet

Sponge-Rez
Download Safety Data Sheet
Download Technical Data Sheet

VENTILATION AND SAFETY RECOMMENDATIONS CLICK HERE